How To Install Bobcat Door

In this Pro Tip Guide y'all'll learn how to Install the Bobcat Front Door Glass on your Skid Steer, saving you both time and money. Whether your replacing your cleaved Yard-Serial Door Glass or if you lot've purchased ane of our G-Series Complete Door Kits , this guide will help make installation quick and easy. If you have any further questions on this installation process, feel free to contact our Sideslip Steer Tech Support.

Tools Needed :

1. Padded Stand ( optional )

ii. Rubber Mallet

3. Regular screwdriver or a big, curved pick

4. Tape

Pace ane

To begin, identify the Door Frame of the door face downwards on an elevated surface or stand up and install the Outer Safe Door Seal. Once the seal is attached around the door frame by hand, lightly tap the seal with a rubber mallet to lock information technology into place and trim to the proper length. If your replacing your existing glass, you can skip this step.

Step 2

Side by side, plough the frame confront and install theDoor Drinking glass Seal. Start at the lower parts of the frame near the center, and continue clock-wise working the seal onto the frame placing record as needed to temporarily secure it to the frame. See Figure 1. Once the seal is around the frame's inner opening, you will accept some access seal left over. Trim the seal every bit necessary. If your replacing an existing glass. Be sure to make clean the door seal removing information technology of whatever glass pieces that may have been left over from when it was cleaved. Then follow step two.

Step iii

Place the Door Glass on acme of the frame. Then, using a screwdriver or pick, slowly work the glass into the glass slot on the safety starting from the handle side first and working your way around the frame. See Figure two.

Step 4

In one case the glass is downward into slot of the rubber seal, using the same tools equally pace iii, start to fold the top lip into the prophylactic every bit testify in Figure 3.

Pace 5

Turn the door face down and install theSafe Cord. Brand sure the cord is inserted all the way down into the groove every bit this will lock your drinking glass into the door frame. Once the cord is worked around the frame, cut whatsoever access off as needed, and then install a brightly colored ZipTie under the string at the top of the door. See Effigy iv. When pulled, the ZipTie will release the cord out of the groove assuasive the window to be pushed out of the frame in example a emergency get out from the machine is needed.

Once yous've complete all the to a higher place steps, make clean the forepart and back of the glass and install all of the supporting components for your door. Any parts needed in installing or updating your BobcatDoor can be found online at AllSkidsteers.com

Related Posts :

How to Install Bobcat Skid Steer Wiper Assembly ►

Related Pages :

Doors and Replacement Parts for Bobcat® ►

G-Series Loaded Door Assembly ►