How To Install Mydlink Camera

mydlink Full Hard disk Outdoor Pro Wi-Fi Camera Installation Guide

DCS-8302LH

What'due south in the Box

Simple Setup

Delight set up up your device before mounting it.

Get the mydlink app on the App Shop or on Google Play. Launch the app, and so Sign In or Create a New Account.
Ability on the device and wait for the Status LED to flash orange.
Annotation: Brand sure that your mobile device's Bluetooth is on.
Identify your device side by side to your mobile device. A prompt will appear – tap Add Device, so follow the app instructions.

Setup Code

This is a backup of your device'south Setup Code. Please go on information technology every bit future reference for your device.

LED Behavior

Mounting

Identify the camera eight to 10 anxiety (2 – 2.5 meters) from the ground. Person Detection works best when the subject is between 6.v to 23 feet (ii – 7 meters) away from the camera.

Pole Mounting

Place the mounting subclass against the pole where yous want information technology to exist positioned.
Wrap the cablevision ties effectually the pole and thread them through the holes on the mounting bracket. Confront the crude side of the cable ties to the pole to avert slippage.
Twist the camera clockwise onto the mounting subclass until it securely locks into place.

Wall Mounting

Place the mounting bracket against the wall where you desire the device to be positioned. Employ a pencil to make two marks where the holes are located.
Use a 6 mm drill scrap to drill two 26 mm deep holes over the pencil marks.
Hammer in the plastic wall anchors to support the screws.
Align the mounting bracket's holes over the plastic anchors. Drive the screws into the anchors to secure the mounting bracket.
Twist the camera clockwise onto the mounting bracket until it securely locks into place.

For outdoor installations: This device is designed to exist installed under eaves or similarly covered locations, and does not support inverted installation. Please ensure that the device is installed with the rubber plug pointed down towards the ground, and that it is not installed in an area where it will experience continuous water exposure.

FAQ

What exercise I do if my device is not working properly?
Reset and reinstall your device. Employ a paper clip to press the recessed Reset button and the LED volition turn solid cerise. During installation, ensure that:
- Your router is connected to the Internet and Wi-Fi is enabled
- Your mobile device is continued to your router'due south Wi-Fi and Bluetooth is enabled
- Your mydlink device is in range of your Wi-Fi network.
How can I apply phonation commands to command my device?
The device will piece of work with both Amazon Alexa and the Google Assistant. For setup instructions on these services, visit the following websites:
Amazon Alexa
dlink.com/en/alexa
The Google Banana:
dlink.com/en/google-banana
Why is my microSD card non working/not supported?
The microSD card must be formatted into the correct file organization (FAT32) earlier information technology can be used with this product. This can be done in the mydlink app by selecting the Format role in the storage menu under the device settings.
What is my username and password for setting upwards my device with an ONVIF system?
To connect your device to an ONVIF system, primal in "admin" every bit the username and use the Pin code of your mydlink device as the password. You tin can find the Pin code on your device's characterization.

Need Help?

Having problem installing your new product?
D-Link'south website contains the latest user documentation and software updates for D-Link products. Customers tin contact D-Link Technical Support through our website by choosing the relevant region.

United States
Website: http://support.dlink.com
Telephone: (877) 453-5465

Ezoic